***Registration open for 6 Months Industrial Training***...HURRY!!!...Limited seats available...

Educational Product :: Embedded Lab

Universal Microcontroller/ Embedded Development Board


 Universal Microcontroller Development Board

E2PROM with 4K.memory or more

RTC DS1307 with 32 KHz Crystal with battery back-up.

Two 12V relays with isolated O/Ps on 3 pin connectors.

One 12V stepper motors with drivers.

All interrupts available on header.

16 x 2 LCD display.

8 I/Ps from DIP switches.

8 O/Ps available on LEDs.

4 multiplexed 7-segment displays.

4-Single bit keys ,8 Channel ADC with Potentiometers

and provision of External inputs

 

232 Communications 

 

Daughter Boards:

8051 Daughter board (USB Interfacing)

PIC Daughter board (USB Interfacing)

AVR Daughter board (USB Interfacing)

ARM7 Daughter board (USB Interfacing)

Download Broucher For Complete Information
Student Microcontroller Trainer Kit 8051


*  89V51RD2FN /AT 89s51 m C with ISP features

*  In- circuit Programming and serial communication
•   through PC.
*  E2PROM with 12 C interface with capacity of 4K.
*  RTC with battery back-up.
*  One +5V relays with isolated O/Ps.
*  All interrupts available on header.
*  16X2 LCD display.
*  8 I/Ps from DIP switches.
*  8 O/Ps available on LED's.
*  4 multiplexed 7-segment displays.
*  Windows based driver software for programming.
*  External Reset switch.
*  On board buzzer.
Download Broucher For Complete Information
NANO -51 Project oriented Board

* 16X2 LCD display

*  4 multiplexed 7-segment displays
*  Buzzer
*  8 I/Ps from DIP switches.
*  8 O/Ps available on LED's
*  Compatible to program AT89S51 and P89C51RD2
*  All four ports are available on connector for external interface
*  On board reset circuit
*  Stepper motor interface
*  2 x 2 Matrix keypad
*  4 on board Tactile switches
*  USB powered / power jack
*  Also available with USB Programming Facility


Download Broucher For Complete Information
Embedded Biometric Development System
*  The System should have a biometric Finger recognition module with a processor based system, 5V DC + 200mV Supply Voltage Communication  Speed 9600 to 115200 bpsCapture Speed 0.4 (normal)/0.7 (Secure)sec.
*  Verification Speed 1.2 sec (Capture + Extract + Match)Boot up time 0.34 Sec.
*  Facility  of  100 Fingers Data base can  be stored Special Function : Fast Identification, Cancel, Adaptive Capture for Dry, Wet, Small Finger
*  Based on MCS51 processor at 11.0592 mhz clock,
*  64k Flash memory, 32 Digital I/O With realtime clock, E2PROM 4K (support I²C bus) sample programs and experimental manual must be provided serial port.
*  On board stepper motor interface, On board LCD display, On board relay & buzzer interface for switching devices.

Download Broucher For Complete Information
Embedded Fiber Optic Application Board


*  Receiver system with SMA Connectors

*  6V DC Power Supply, PMMA Fiber cable, Receiver + 0.3 db Optical Power 100 μW (peak),.
*  Vin/V out – TTL Compatible Speed – DC to 500 kbps  (min).
*  Based on MC-51 controller  at 11.0592 mhz clock,
*  64k Flash memory
*  32 Digital I/O With realtime clockE2PROM 4K (support I²C bus) sample programs and experimental manua
*  lSP programming .
*  On board stepper motor interface
*  on board LCD display,
*  On board relay & buzzer interface for switching devices.

Top
Our Presence